CUBICLES TOILETS HARDWARE - CABSAN Accessories for sanitary cabins
range 2
Polyamide clamp for fixing 13mm panels to 34mm diameter tubes. Delivered with 2 self-tapping 4.8 x 20mm cross-head stainless steel screws, 2 polyamide covers and a polyamide spacer. The clamp is attached to the panel with the spacer and a screw. The clamp is attached to the tube with the second screw. The screws are invisible after mounting thanks to the polyamide caps clipped onto the clamp.
Range 6300
range 2
Polyamide clamp for fixing 10mm panels to 34mm diameter tubes. Delivered with 2 self-tapping 4.8 x 20mm cross-head stainless steel screws, 2 polyamide covers and a polyamide spacer. The clamp is attached to the panel with the spacer and a screw. The clamp is attached to the tube with the second screw. The screws are invisible after assembly thanks to the polyamide caps clipped on the clamp.
Range 106300
range 2
Polyamide clip for fixing 13mm panels to the wall. 1 5mm chamfered hole for fixing the clip to the wall. Delivered with 2 self-tapping 4.8 x 20mm screws with stainless steel cross head, 1 polyamide cover and a polyamide spacer. The clamp is attached to the panel with the spacer and a screw. The screw is invisible after assembly thanks to the polyamide cover clipped on the clamp.
Range 6400
range 2
Polyamide clip for wall mounting. for 10mm panels 1 5mm chamfered hole for fixing the clip to the wall. Delivered with 2 self-tapping 4.8 x 20mm screws with stainless steel cross head, 1 polyamide cover and a polyamide spacer. The clamp is attached to the panel with the spacer and a screw. The screw is invisible after installation thanks to the polyamide cover clipped onto the clamp. Including 2 adapter blocks (wedges only in gray 7038 and 7043)
Range 106400
range 2
Set of 2 adapter shims for 10mm polyamide panels each with a thickness of 1.5mm for use with the tubular clamp for 13mm panel ref. product 63 and the wall clamp for 13mm panel product number 64. The shims slip on each side of the 10mm panel between the clamp and the panel. The shims are held in place by the spacer of the clamp.
** (only in gray 7038 and 7043)
( ** )
range 2
Polyamide bracket for attaching the side panel to the wall. 2 chamfered holes of 5mm. The screws (not supplied) are invisible after mounting thanks to the polyamide caps clipped onto the bracket.
Gamme 6200
range 1
Single polyamide coat hook. Base with 2 chamfered holes of 4,5mm. Screws (not supplied) are invisible after assembly thanks to the polyamide cover clipped onto the hook.
Ref XDF60
range 2
Single polyamide coat hook. Base with 2 chamfered holes of 4,5mm. Screws (not supplied) are invisible after assembly thanks to the polyamide cover clipped onto the hook.
Gamme 6000
Professionals ask for our PRO rate on contact@cabsan.com
range 2
Double polyamide coat hook. Base with 2 chamfered holes of 4,5mm. Screws (not supplied) are invisible after assembly thanks to the polyamide cover clipped onto the hook.
Range 6100
range 2
Polyamide roll holder. Base with 2 chamfered holes of 5mm. Screws (not supplied) are invisible after mounting thanks to the polyamide cover clipped onto the roll holder.
Range 6500
CABSAN FRANCE-equipment and accessories for communities
